Welcome to team Vimage Official Homepage.
"Engineering to Infinity and Beyond"
>>Updates:06/06/05 Please visit http://www.engr.ucr.edu/~vhoang/sendesign for the final wrap up. Sorry for not updating this main page...ran out of space in the H drive....anyway this is it...good luck and congratulate to all seniors.
>>Updates: 3/30/2005 Here a recent up to date picture of our final design.
>>Updates: 3/07/2005 Here a picture of our final design...but not the final picture.
>>Updates: 1/18/2005 We finally have the chance to update our website. The conceptual phase is completed
and we are now working on the prototype phase. To check out our final design go to Report.
>>Prelude
>> During the manufacturing process when the coating solution is applied, some of the solution can overflow onto undesirable area, the inner diameter. Our goal is to design a coating overflow removal tool that is easily operated by one person and each cycle time should be around 2 minute. Our engineering requirements is that it should remove as much overflow from the inner diameter as possible without damaging the stent and the drug coated on the outer diameter. The removal tool should be able to work with a range of 8-28mm in length and an inner diameter of 1.37 mm.
>> Home << General >> Concepts << Reports >> Multimedia